Connecting To The Projector - Sony RM-PJ1000 Manual Del Usuario

Connecting to the Projector

Projector
CONTROL S IN
Remote control cable
CONTROL S OUT
(supplied)
Notes for wireless remote control operation
• Make sure that there are no obstructions between the
Remote Commander and the projector.
• Operating range is limited. The shorter the distance
between the Remote Commander and the projector, the
wider the angle in which the Remote Commander can
control the projector.
RM-PJ1000
• When you connect the Remote Commander to the
projector using the remote control cable, the remote
control detector of the projector does not function.
For wireless operation, be sure to disconnect both plugs
from the projector and the Remote Commander.
Notes for wired remote control operation
• When you connect the Remote Commander using the
supplied remote control cable (stereo), it functions without
batteries. However, the LIGHT button may not function
without batteries depending on the projector.
• When you connect the Remote Commander using a
monaural remote control cable (not supplied), it functions
only when the batteries are installed.
RM-PJ1000. 3-858-586-02.J/E/F/G/S/I/C
20