Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Remote operation
The remote start system operates at 434 MHz and incorporates Direct-
ed's proprietary A.S.K. out-board two-way remote. The high frequency
combined with Binary Data communication achieves superior range
with two-way communication.
Paging features
The control module sends a page to the remote as conirmation of a
received command, or alarm system status.
When the remote receives a page notiication, it beeps or vibrates and
the alarm status, armed/locked or disarmed/unlocked, (the lock or un-
lock icon) appears on the LCD. If the alarm has been triggered, the
remote LCD displays the zone triggered. To clear the alarm page, press
any button on the remote. The LCD information is also cleared.
Note: You will not be able to send a command, until the alarm page
is cleared.
Setting the clock
press
hold
To set the clock
and
for ive seconds, the transceiver
will sound twice and the hour selection will start lashing. Immediately
press
to advance the hour selection or
to reverse the hour
selection.
press
Once the correct hour is displayed
again and the minute
press
selection will start lashing. Then
to advance the minute
selection or
to reverse the minute selection. Once the correct time
is displayed simply stop pressing all buttons for 15 seconds and the
transceiver will automatically exit the clock mode.
© 2010 Directed Electronics. All rights reserved.
13
Publicidad
Capítulos
Tabla de contenido
