Remote Start - Directed Electronics 474A Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The status LED lights solidly if you are en ter ing Valet Mode, and goes
off when you exit Valet Mode.

Remote start

This feature allows you to remotely start and run your vehicle for a
pro gram ma ble period of time. This makes it possible to warm up the
engine, as well as adjust the interior tem per a ture of the ve hi cle with
the climate control system. If interior heating or cooling is desired, the
climate controls must be preset, and the fan blower must be set to the
desired level prior to remote starting the vehicle.
Warning!
the keys are in the ignition, except when performing
Valet® Take-Over, and (2) Never start the vehicle if it
is not in PARK or NEUTRAL
To remote start the vehicle:
Press
on the remote control once.
The parking lights lash to conirm that the vehicle will attempt to
start. With gas vehicles the engine starts 4 seconds after the park-
ing lights lash. With diesel vehicles the engine starts when the
WAIT-TO-START indicator on the dashboard goes out or the pro-
grammed delay has ended.
Once the vehicle has started, it runs for the pre- pro gram med pe-
riod of time (either 12, 24, or 60 minutes; See Programming Op-
tions section) or until a shutdown input is trig gered.
Warning!
garage or other closed off area. Breathing the ex haust
from the vehicle is hazardous to your health. Never
activate the remote start in an enclosed space.
18
(1) Never remote start your vehicle when
It is unsafe to operate a vehicle's motor in a
© 2010 Directed Electronics. All rights reserved.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido