Bluetooth Pairing - EDIFIER W860NB Manual De Instrucciones

Power ON/OFF
●

Bluetooth Pairing

●
1. When turned off, press and hold the multifunctional button for about
5 seconds to turn the headphone on, wait until red and blue light flashes
alternately, then the headphone enters pairing state;
2. Set the mobile phone to search for and pair with "EDIFIER W860NB", after
pairing is successful, blue light will flash slowly.
Connect Two Bluetooth Devices Simultaneously
●
1. Pair the headphone with the first device;
2. Restart the headphone; press and hold the multifunctional button to let it
enter pairing state and pair with the second device;
3. Operate the first device to pair with the headphone again, then it is successfully
connected with two devices simultaneously.
NFC (Near Field Communication) Function
●
1. Ensure your Bluetooth phone support NFC connection.
2. When mobile phone is in sleep state or black screen, it cannot pair with the
headphone via NFC connection.
3. For initial pairing, let mobile phone touch W860NB for an extended period of
time and release until W860NB enters pairing mode.
For mobile phone paired previously, turn
the headphone on and place the mobile
phone near its NFC area, then it will
automatically pair with the mobile
phone (whether Bluetooth function of
the mobile phone is enabled or not).
4. When unconnected with a device,
enabling NFC function can connect
with it; when connected with a device,
enabling NFC function can disconnect with it.
Power on: press and hold
for 3 seconds
Power off: press and hold
for 3 seconds
NF C