Klarstein Vulsini Manual De Instrucciones página 49

Problem
The remote control does
not work when buttons are
pressed.
Possible cause
No batteries.
Poor signal transmission.
Distance too great.
Approach
Replace the batteries
Make sure that the
distance between
transmitter and receiver is
not too great.
Press the buttons on the
remote control with a
smooth movement and
gentle pressure.
Repeated pressing of the
buttons in rapid succession
may cause the transmitter
to malfunction.
Operate the remote
control less than 20 feet
from the front of the unit;
point the remote control at
the control panel.
EN
49