Publicidad
Idiomas disponibles
Idiomas disponibles
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
1-1/2"
(3.8 cm)
Drop-In Rim Detail
1-1/2"
(3.8 cm)
19-1/2"
(49.5 cm)
1-1/2" OD
Product Information
Applicable product:
Drop-in rim style
Fixture*:
Bathing well
Basin area
55-1/4" (140.3 cm) x 23-1/2" (59.7 cm)
bottom
Basin area top
64-1/2" (163.8 cm) x 32" (81.3 cm)
Weight
112 lbs (50.9 kg)
To overflow
Water depth
15" (38.1 cm)
Capacity
75 gal (284.1 L)
* Approximate measurements for comparison only.
Included components:
Cut-out template
Blower motor:
Heater
1 hp
300 W
Minimum access panel pump/control:
20" (50.8 cm) W x 15" (38.1 cm) H
1076064-1-A
Blower/Control Access
20" (50.8 cm) W x
15" (38.1 cm) H Min
42" (106.7 cm)
K-1164-G
1042557-7
V
Hz
120
60
required
2-3/4" (7 cm)
72" (182.9 cm)
1" (2.5 cm) from
the Floor to the
Bottom of the Drain
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Blower motor is supplied with a 24" (61 cm) grounding-type
plug-in cord.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
37 lbs/square foot (178 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the bath or
greater. Installations will vary.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
A
5
2
21"
(53.3 cm)
3-1/8"
(7.9 cm)
11-1/16"
(28.1 cm)
3-1/2"
(8.9 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
120 V, 5 A, 60 Hz
Kohler Co.
Publicidad
