Horizon Global 76225 Instrucciones De Instalación página 5

2. Lower the exhaust using exhaust removal pliers, detach the (2) exhaust
hangers on each side of the vehicle. Note: make sure that the exhaust system is
supported prior to lowering the exhaust. Note: use of spray lubricant may be
useful in removing exhaust hangers.
4. Insert hitch into frame rails and install fasteners. Once hitch is in position, attach the carriage bolt to the pull wire. Feed the pull wire through the block and then
the frame rail and out the attachment holes. Make sure the blocks are aligned properly and do not overlap, (3) fastener assemblies per side.
©2017 Horizon Global Americas Inc. - Printed in Mexico
3. Remove bumper beam. Using a 13mm socket, remove the (3) nuts
holding the bumper beam on each side of the vehicle. Remove all wiring
from bumper beam and return bumper beam to customer.
Sheet 5 of 18 76225NP 11-7-17 Rev. A