CONTROL OF THE FASTENING SYSTEM OF THE BATTERY:
It is important periodically to control in the battery space that:
1) the fastening screws of the battery (1) are not loose: in this case tighten them to the
bottom to avoid that batteries are blocked in their space
2) that in the areas next to the fastening screws are not traces of metal alterations, in
this case proceed as follows:
1 - disconnect the socket at the interior of battery space (1)
2 - dismantle the flange supporting the socket pushing on the two fastening screws (2)
3 - take out the battery removing the screws shown in figure (3)
4 - carefully clean and eliminate the dirt from the corroded area;
5 - paint again with anti-acid paint;
6 - install again the battery and the flange supporting the socket fastening tight with the
screws
7 - connect the back.
DANGER!
BATTERY IS SOLIDLY FIXED IN THE BATTERY SPACE: A
BATTERY LOOSE FIXED COULD CAUSE THE TRUCK
INSTABILITY AND CONSEQUENTLY ITS OVERTURN
BATTERY MAINTENANCE
1
IT IS PARTICULARLY IMPORTANT THAT THE
48
2
.
2