Pegasolift TPL 16 Guía Para El Uso Y El Mantenimiento página 50

TILLER ALIGNMENT ADJUSTING
5
1
3
1
2
4
Periodically it is necessary to check that the direction of the truck is aligned with the
direction set up from the tiller; if it is necessary execute the alignment again between
tiller and traction wheel, it need:
1) disconnect the battery (1);
2) unscrew the screws (2 and 4) to remove the rear cover (3);
3) loosen the screw (5) of the chain sprocket on the traction wheel stearing column until
this in free to rotate;
4) align the tiller with the traction wheel checking the direction of the truck for short
stretch.
5) tighten with force the screw of the chain sprocket keyed on the traction wheel stearing
column. If the screw tends to loosen again, replace the grower washer.
6) Reassemble the rear cover
50