Maintenance & Cleaning - Delabie BINOPTIC Manual De Instrucciones

MAINTENANCE
Changing the sensor and the cable (ref. 512DET)
• Remove the existing sensor cable assembly and installing the new assembly: Fig. BA to BN or BK
(pages 27-29) depending on the model.
• Replacing the elements in the spout: Fig. BO to BS (page 30) depending on the model.
• Put the switch in the "ON" position.
• Prime the pump: cf. INSTALLATION section > Priming the pump.
Changing the soap and air tubes (ref. 512KIT)
• Follow the instructions Fig. CA to CK (pages 31-32).
• Put the switch in the "ON" position.
• Prime the pump: cf. INSTALLATION section > Priming the pump.
MAINTENANCE & CLEANING
• Cleaning chrome, aluminium and stainless steel: do not use abrasive, chlorine or any other acid-
based cleaning products. Clean with mild soapy water using a cloth or a sponge.
DELABIE
For the UK market only: Tel. 01491 821 821 - email: technical@delabie.co.uk
For all other markets: Tel. +33 (0)3 22 60 22 74 - email: sav@delabie.fr
After Sales Care Support:
The installation guide is available on: www.delabie.co.uk
The installation guide is available on: www.delabie.com
EN
5