Kit Assembly - Metra 95-3310B Instrucciones De Instalación

ISO DDIN radio provision
1. Slide the radio brackets into the
trim panel aligning the holes in
the trim panel to the clips on the
brackets. (Figure A)
2. Slide the radio into the bracket/
trim panel assembly and secure
the radio to the assembly using
the screws supplied with the radio
(Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
4. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.

Kit Assembly

(Figure A)
95-3310B
(Figure B) (Figure B)
3