Important Features; Remote Control; Inserting Batteries - Revell Control Eru24490 ca Manual De Instrucciones

24490
Safety instructions:
• Before commissioning for the
first time, make sure that you
have read and understood the entire
manual.
• Please keep the manual and
packaging as they contain important
instructions.
• The user should only operate this
model in accordance with the
instructions for use in this operating
manual.
• This model is suitable for pilots who
are at least 8 years of age. Parental
supervision is required when driving it.
• Warning! Not suitable for children
under 36 months. Small parts.
Choking hazard!
• This model is suitable for use indoors
and in dry outdoor areas.
• Keep your hands, face and loose
clothing away from the model during
operation.
• Switch off the remote control and
model when they are not in use.
• Remove the batteries from the
remote control and the model when
they are not in use.
• Always maintain visual contact with
the model in order to avoid losing
control of it. Inattentive and careless
use can lead to considerable damage.
• Do not operate the model near people,
animals, roads or bodies of water.
• This model is not suitable for people
with physical or mental limitations.
We recommend that people who are
unfamiliar with remote control models
operate the model under the guidance
of someone with experience.
• A model should never be operated
under the influence of drugs or alcohol.
• This vehicle may not be used on public
roads!
10

IMPORTANT FEATURES

RC CRAWLER WITH GHz
TWO-CHANNEL REMOTE CONTROL
• VERY EASY TO DRIVE DESPITE ITS SIZE
• ROBUST CONSTRUCTION
• LARGE PROFILE TYRES FOR EXCELLENT
GRIP
• In general, it must be ensured that
the model cannot injure anyone in
consideration of potential malfunctions
and defects.
• The model may only be repaired or
modified with genuine Revell control
spare parts. Otherwise, the vehicle
can be damaged or pose a danger. In
order to prevent risks, always operate
the model from a position which
provides an easy line of retreat, if
necessary.
Remote control safety instructions:
• Rechargeable batteries must be
removed from the remote control or
the model prior to recharging.
• Non-rechargeable batteries may not
be charged.
• Rechargeable batteries may only
be charged under the supervision of
an adult.
• The combination of different types of
batteries as well as new and used
batteries must be avoided.
• Only recommended batteries or those
of an equivalent type may be used.
• We recommend new alkali manga-
nese batteries for the remote control.
Single-use batteries for this remote
control and other electrical devices
operated in the home can be
replaced with environmentally-friendly
rechargeable batteries.
• Batteries must be inserted according
to the correct polarity (+ and -).
• Depleted batteries must be removed
from the remote control.
• The connection terminals may not be
short-circuited.
• Please remove the batteries from the
remote control if it is not to be used
for an extended period of time.
Maintenance and care:
• Please only use a clean, damp cloth to
wipe off the model.
• Protect the model and batteries from
direct sunlight and/or direct heat.
• Never allow the remote control to
come into contact with water, because
the electronics can be damaged as a
result.
• Technical changes and differences in
colour reserved!
Battery requirement for
the remote control:
Power supply:
Batteries: DC 4,5 V;
3 x 1.5 V AA batteries
(not supplied)
Batteries required for the vehicle:
Power supply:
Batteries:
Rated output: DC 9.6V / 800 mAh
Batteries:1 x 9.6 V rechargeable
NiMH battery (supplied)
1 VEHICLE
1A Axle holder
1B Suspension
1C Securing lever
1D ON/OFF switch
1E Straight-ahead trimming
1F Battery compartment
1G Locking screw for battery
compartment

2 REMOTE CONTROL

2A Lever for forward 2E Battery
and reverse
compartment
travel
2F Securing lever
2B Power LED
2G Battery
2C ON/OFF switch compartment
securing screw
2D Steering wheel

3 INSERTING BATTERIES

Remote Control
3A Unscrew and remove the cover.
3B Insert 3 x 1.5 V AA batteries and
pay attention to the polarity, as
shown in the battery compartment.
3C Close the battery cover and secure
with the screw.
Model
3D Unscrew and remove the cover.
3E Insert 1 x 800 mAh NiMH battery,
paying attention to the polarity
as shown in the battery
compartment.
3F Close the battery compartment
cover and tighten the screw.
11