Grundig DSB 1000 Manual De Usuario página 22

SAFETY ___________________________________
moving the cart/apparatus combination
to avoid injury from tip-over.
Unplug the apparatus during lightning
•
storms or when unused for long periods
of time.
Refer all servicing to qualified personnel.
•
Servicing is required when the apparatus
has been damaged in any way, such as
power supply cord or plug is damaged,
liquid has been spilled or objects have
fallen into the apparatus, the unit has
been exposed to rain or moisture,
does not operate normally, or has been
dropped.
This equipment is a Class II or
•
double insulated electrical appliance. It
has been designed in such a way that it
does not require a safety connection to
electrical earth.
The apparatus shall not be exposed to
•
dripping or splashing. No objects filled
with liquids, such as vases, shall be
placed on the apparatus.
Minimum distance around the apparatus
•
for sufficient ventilation is 5cm.
The ventilation should not be impeded
•
by covering the ventilation openings with
items, such as newspapers,table-cloths,
curtains, etc...
No naked flame sources, such as
•
lighted candles, should be placed on the
apparatus.
Batteries should be recycled or disposed
•
of as per state and local guidelines.
22 ENGLISH
The use of apparatus in moderate
•
climates.
Caution
Use of controls or adjustments or
•
performance of procedures other than
those described herein, may result in
hazardous radiation exposure or other
unsafe operation.
To reduce the risk of fire or electric
•
shock, do not expose this apparatus to
rain or moisture. The apparatus must not
be exposed to dripping or splashing and
objects filled with liquids, such as vases,
must not be placed on apparatus.
The mains plug/appliance coupler is
•
used as the disconnect device, the
disconnect device must remain readily
operable.
Danger of explosion if battery is
•
incorrectly replaced. Replace only with
the same or equivalent type.
Warning
The battery (batteries or battery pack)
•
shall not be exposed to excessive heat
such as sunshine, fire or the like.
Before operating this system, check
•
the voltage of this system to see if it
is identical to the voltage of your local
power supply.
Do not place this unit close to strong
•
magnetic fields.
Do not place this unit on the amplifier
•
or receiver.