Demo Mode; Hdmi Connection - Grundig DSB 1000 Manual De Usuario

CONNECTION _______________________________
Dolby Atmos ®
Dolby Atmos gives you amazing experience you
have never before by overhead sound, and all the
richness, clarity, and power of Dolby sound.
For using Dolby Atmos ®
1. Dolby Atmos® is available only in HDMI
mode. For the details of the connection,
please refer to "HDMI CONNECTION".
To use Dolby Atmos® in HDMI 1 and HDMI 2
mode, your TV has to support Dolby Atmos®.
2. Make sure that "No Encoding" is selected
for bitstream in the audio output of the
connected external device (e.g. Blu-ray DVD
player, TV etc.).
3. While entering Dolby Atmos / Dolby Digital /
PCM format, the soundbar will show DOLBY
ATMOS / DOLBY AUDIO / PCM AUDIO.
Tips:
• The full Dolby Atmos experience is only available
when the Soundbar is connected to the source
via a HDMI 2.0 cable.
• The Soundbar will still function when connected
via other methods (such as a Digital Optical
cable) but these are unable to support all of the
Dolby features. Given this, our recommendation
is to connect via HDMI, in order to ensure full
Dolby support.

Demo mode:

In standby mode, Long press (VOL +) and (VOL -)
button on soundbar at the same time. The sound-
bar will power on and demo sound can be activa-
ted. The demo sound will play around 20 seconds.
Note:
1. When demo sound be activated, you can
press button to mute it.
2. If you want to listen the demo sound longer,
you can press
26 ENGLISH
to repeat the demo sound.
3. Press (VOL +) or (VOL -) to increase or
decrease the demo sound volume level.
4. Press button to exit demo mode and the
unit will go to standby mode.

HDMI Connection

Some 4K HDR TVs require the HDMI input or pictu-
re settings to be set for HDR content reception. For
further setup details on HDR display, please refer
to the instruction manual of your TV.
Using HDMI to connect the soundbar, AV equip-
ment and TV:
Method 1: ARC (Audio Return Channel)
The ARC (Audio Return Channel) function allows
you to send audio from your ARC- compliant TV to
your sound bar through a single HDMI connection.
To enjoy the ARC function, please ensure your TV
is both HDMI-CEC and ARC compliant and set up
accordingly. When correctly set up, you can use
your TV remote control to adjust the volume output
(VOL +/- and MUTE) of the sound bar.
• Connect the HDMI cable ( included ) from unit's
HDMI (ARC) socket to the HDMI (ARC) socket on
your ARC compliant TV. Then press the remote
control to select HDMI ARC.
Tips:
• Your TV must support the HDMI-CEC and ARC
function. HDMI-CEC and ARC must be set to On.
• The setting method of HDMI-CEC and ARC may
differ depending on the TV. For details about ARC
function, please refer to the owner's manual.
• Only HDMI 1.4 or higher version cable can
support the ARC function.
• Your TV digital sound output S/PDIF mode setting
must be PCM or Dolby Digital.