■ After each use, whenever the appliance is unsupervised, prior to
assembly, prior to disassembly, prior to cleaning and in the event
of an error, the appliance must always be disconnected from the
mains.
W Risk of injury!
■ Care should be taken when handling the sharp cutting blades,
emptying the container and during cleaning.
■ Before replacing accessories or additional parts which move during
operation, the appliance must be switched off and disconnected
from the power supply.
■ Never place fingers in the attached blender. Never operate
the appliance without a completely assembled blender or attached
lid! Do not remove or attach blender jug until the appliance has
been switched off and the drive has come to a standstill. When the
appliance has been switched off, the blade continues running for a
short time.
■ Always work with a completely assembled universal cutter! Do
not remove or attach universal cutter until the appliance has been
switched off and the drive has come to a standstill.
W Risk of scalding!
■ If processing hot liquids, steam escapes through the funnel in the lid.
You should always use one hand to hold the lid firmly in place
while you work, but don't place your hand over the filling opening!
■ Pour a maximum 0.5 litres of hot or frothing liquid into the
blender jug.
■ Care shall be taken while filling hot liquids in the appliance, as
suddenly hot steam may escape.
W Risk of suffocation!
Do not allow children to play with packaging material.
W Caution!
■ Check that there are no foreign objects in the blender jug. Do
not insert objects (e.g. knives, spoons) into the jug. Only use the
pusher provided with the lid on!
■ We recommend that the appliance is never switched on for longer
than is necessary to process the ingredients. Do not operate
at no-load.
W Important!
It is essential to clean the appliance thoroughly after each use or
after it has not been used for an extended period. X "Cleaning and
servicing" see page 20
Important safety information
en
15