Weston BUTCHER Serie Manual Del Usuario página 8

PLEASE NOTE: This Grinder features an all-hardened steel gear
transmission. This causes the Grinder to operate at a higher volume and
temperature than other Grinders. This is normal and will not affect the
Grinder's performance.
GRINDING TIPS
•
DO NOT overtighten the Front Ring Nut. It should be firmly tight.
•
Make sure the Grinding Knife blades lay flat on the Grinder Plate.
•
DO NOT operate the Grinder without meat in the Head. Running the
Grinder while dry could damage the Head and Auger.
•
ALWAYS lubricate the Head, Grinding Plate, and Grinding Knife with a
food-grade silicone spray after cleaning.
w WARNING Cut Hazard. If the Grinder Plate becomes jammed/clogged
during operation, follow these steps to restore normal output:
•
Turn the Grinder "OFF" (O) and disconnect the Power Cord from the
electrical outlet.
•
Remove the Front Ring Nut and Grinding Plate.
•
Thoroughly clean the Grinding Plate. Make sure all of the holes are clear.
•
Reinstall the Grinding Plate and Front Ring Nut.
•
Reconnect the Grinder to the electrical outlet.
•
Continue with grinding.
•
Repeat as necessary.
8