Kohler K-13960 Guia De Instalacion página 10

Supply Outlet
5. Install the Hose Assembly
Install the Hose Assembly
Apply thread sealant to each end of the hose.
Securely tighten one end of the hose into the supply outlet.
Securely tighten the other end of the hose into the nozzle.
Hang the nozzle from the supply clamp.
Installation Checkout
For one pedal bedpan washers: Using the key provided, open
both the check valve and the supply valve.
For two pedal bedpan washers: Using the key provided, open
both the check valve and the supply valve for each pedal.
Check for leaks. Repair as needed.
Clean the Aerator
Turn the aerator clockwise to remove it from the nozzle.
Run water through the nozzle for approximately one minute to
remove debris.
Test and verify that the nozzle operates normally.
Reinstall the aerator to the nozzle.
1034416-2-C
Supply Clamp
Aerator
Nozzle
Hose
10 Kohler Co.