Motorola PMPN4523 Guia Del Usuario página 9

2 Plug the wall power adapter into the appropriate Alternating Current (AC) outlet.
A successful power-up sequence is indicated by a single green blink on the charger indicator.
Refer to the IMPRES Battery Charging Indicators on page
3 Insert an IMPRES battery, or a radio with an IMPRES battery into the charger pocket.
a Align the battery contacts with the charger contacts.
b Press the battery into the pocket, ensuring complete contact.
Once the IMPRES battery is properly seated into the pocket, the charger indicator illuminates,
indicating the charger has recognized the presence of the battery.
4 To remove a radio or IMPRES battery from the charger, pull straight up until the battery
completely clears the charger housing.
1.2
IMPRES Battery Charging Indicators
Table 1: IMPRES Battery Charging Indicators
Status
Charger Power On
Rapid Charging
Charged to 90 % or
more
Charged to 95 % or
more
Calibration
Fault
LED Status
Chapter 1: IMPRES Batteries and Chargers
1
9.
Green for approx. 1
sec
Steady red
Flashing green
Steady green
Steady amber
Flashing red
MN006348A01-AB
Comments
Successful charger
power-up.
Battery in rapid
charge mode.
Battery is charged to
90 % or greater ca-
pacity.
Battery is charged to
95 % or greater ca-
pacity.
Battery is in recondi-
tion or calibration
mode.
Not chargeable; re-
move and re-insert ra-
dio or battery.
9