Hydrocolloid Coolant Supply; Tray - Sirona C1+ Instrucciones De Uso

21 Additional equipment and accessories

21.4 Hydrocolloid coolant supply

21.4
Hydrocolloid coolant supply
21.5

Tray

84
Additional equipment
If you want to work with a hydrocolloid coolant supply,
you can obtain an adapter, Order No: 33 15 814, free of
1
charge with the enclosed voucher.
Please state your address and the serial number of the
chair (refer to "Installation Report / Warranty Passport").
The adapter can be connected to the cuspidor as fol-
lows:
Pull out the tumbler outlet (1), turning it slightly at the
same time, and plug the adapter (2) into the self-closing
valve until it snaps into place. Press the locking clip (3)
2 3
before pulling out the connecting piece.
For water cooling, please activate the Hydro key in the
Hy
setting dialog for the tumbler filling. Continuous flush-
dro
ing is then preset (page 22).
Hydrocolloid operation is switched on with the tumbler
filling key in the assistant dialog.
Additional equipment
i
NOTE
Maximum load: 1 kg
Sirona Dental Systems GmbH
59 06 446 D 3386
D 3386.201.01.08.02