2. Presentation
Thank you for purchasing FT Injectors. In this manual you will find all the
information you will need to ensure proper operation, configuration and
maintenance of your injectors.
The FT Injector is available in three versions, 320 lb/h, 520 lb/h and 720 lb/h.
Each FT Injector is made with the best possible materials, including corrosion
resistant internals allowing them to be used with any fuel from gasoline to
Nitromethane, Nitropropane and even fuels that contain MTBE and ETBE. Silver
EN
plated terminals ensure the best electrical connection possible along with an
EV1 style connector for positive locking and vibration resistance.
The FT Injector is compatible with any ECU available on the market and requires
a 8A/2A Peak and Hold injector driver.
4