Handling Accessories - breviglieri MekFarmer 170 Manual De Empleo Y Mantenimiento

G
FIG. 6 Handling machine with roller
Lift the machine with the utmost care and move it slowly
without jolting on to the truck or railway car. The surface
on to which the machine is to be loaded must be perfectly
horizontal, to prevent the load from shifting.
If the machine has been placed on a wooden pallet, use
a forklift to handle the pallet. The forklift forks must be as
distant as possible from each other.
3.2.2

HANDLING ACCESSORIES

Accessories with a weight less than 44 lbs can be handled
by a single operator. The rollers must be handled with a
crane and lifting straps("Fig. 7"). Fix two hoisting shackles,
one on each side. Insert the shackle pin in the hole of the
roller holder plate("Fig. 7"). Hitch the lifting straps.
Lift the roller of few centimetres. Check the roller balance
.
CAUTION
Crash risk. The roller is fitted on freely rotating suppor-
ts. Connect a strap to the centre of the roller.
G
FIG. 7
Spiked or maxi spiked roller
Version
300
350
400
Weights refer to the machine with roller.
40
G
Ø 525 Ø 525
Øi 163 Øi 273
Mod. maxi
Kg lb Kg lb
1240 2734 1280 2822
1400 3086 1440 3175
1550 3417 1590 3505
MekFarmer 170
Cage roller
Version
300
350
400
Weights refer to the machine with roller.
Packer roller
Version
300
350
400
Weights refer to the machine with roller.
Crumbling roller
Version
300
350
400
Weights refer to the machine with roller.
Coil roller
Version
300
350
400
Weights refer to the machine with roller.
HANDLING OF SEEDER LINKAGE (OPT)
Model Weight (lb) Hoisting equipment
2000kg capacity 463
The seeder linkage has a hoisting point ("Fig. 8").
Ø 450 Ø 500
Kg lb Kg lb
1230 2712 1280 2822
1430 3153 1480 3263
1570 3461 1620 3571
Ø 500 Ø 550
Kg lb Kg lb
1420 3131 1500 3307
1590 3505 1670 3682
1760 3880 1840 4057
Ø 500
Kg lb
1410 3109
1580 3483
1750 3858
Ø 460
Kg lb
1300 2866
1500 3307
1640 3616
crane/lifting straps