Operating Faults - Riello RX35 S/PV T Instrucciones De Instalación, Uso Y Mantenimiento

8.2

Operating faults

FAULTS
The burner locks out during operation.
20123803
Faults / Solutions
POSSIBLE CAUSES
Valve lets too little gas through
The valve is faulty.
Earth probe.
Disappearance of the flame.
24 GB
SOLUTION
Check mains pressure and/or adjust the
valve as indicated in this manual.
Replace.
Check right position and, if necessary,
adjust as indicated herein.
Clean or replace the ionisation probe.
Check gas mains pressure and/or adjust
the valve as indicated in this manual.