6078.book Page 3 Friday, March 25, 2016 2:43 PM
OPERATIONAL SAFETY GUIDELINES
•
Equipment which is not specified for outdoor use must
only be used in dry locations. Keep in mind if rain or snow
can reach the equipment i.e. through an open vehicle
window.
•
Maximum ambient temperature around the equipment
must not exceed 50 °C (122 °F).
•
Prevent foreign objects or fluids from getting into
equipment.
This is a class A product. In a domestic
!
environment, this product may cause radio
interference in which case the user may be
a u t i o n
required to take adequate measures.
OPERATING SPECIFICATIONS
Vehicular Power Adaptor, VPA (NNTN8040)
Input voltage range: 10.8 to 33Vdc
Vehicular Power Module, VPM
- 0104058J87 (input voltage range: 10.8 to 16.6 VDC)
- PS000149A01 (input voltage range: 10.8 to 33.0 VDC)
PLACING AND REMOVING THE
PORTABLE TERMINAL TO AND FROM
THE CRADLE/HOLDER
PLACING THE PORTABLE TERMINAL IN THE
CRADLE/HOLDER
1. Place the TETRA Handportable Terminal in the cradle/
holder by aligning the slots on the lower side of the
TETRA Handportable Terminal with the alignment guides
located at the bottom of the cradle/holder as shown in
Figure 1 below.
3