Motorola PMLN7018 Guia Del Usuario página 8

6078.book Page 6 Friday, March 25, 2016 2:43 PM
TROUBLESHOOTING
This paragraph provides typical malfunctions that can occur
during the operation of the PMLN6181 and PMLN6182
Vehicular Charger Kit. The paragraph also suggests
corrective actions.
Prior to troubleshooting the malfunction, verify the following:
• Your TETRA Handportable Terminal functions properly
outside the cradle.
• The cable to the cradle is properly connected.
Identify the malfunction in accordance to Table 1 below. If the
malfunction does not appear in Table 1 below, refer to your
Service Provider.
Follow steps in Table 1 below after inserting the TETRA
Handportable Terminal into the cradle and turning the ignition
switch to ON.
Table 1: Troubleshooting Procedures
No. Malfunction
1 Indication of
charging on
the TETRA
Handportable
Terminal
display does
not exist.
2 Charging
Indication
does not exist.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are
trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are
used under license. All other trademarks are the property of their respective owners.
© 2012–2016 Motorola Solutions, Inc.
All rights reserved.
Corrective Action
1. Remove the TETRA
Handportable Terminal from the
cradle and install it again.
2. If the malfunction persists, refer
to your Service Provider.
1. Verify that the ignition switch is
in ON position.
2. Remove the TETRA
Handportable Terminal from the
cradle and install it again.
3. If the malfunction persists, refer
to your Service Provider.
6