Bellman & Symfon AUDIO DOMINO CLASSIC BETXAUD2 Manual De Instrucciones página 316

Proceed as follows to pair up the units:
5 s
A "running light" on the Receiver Unit's Volume and Tone LED Indicator (8)
moving towards the centre indicates that the link has been established.
Please note! If you pair up a Transmitter Unit and a Receiver Unit in the
Settings Menu, this replaces the pairing carried out in the factory. This can
be useful when changing a Transmitter Unit under guarantee or if you want
to pair up several Receiver Units to a Transmitter Unit (e.g. in a conference
room).
316
BE2250_001MAN005_book.indb 316
• Start both the units with the
5 s
• Go into the Settings Menu.
• Hold down the
• Hold down both the M
On/Off buttons i (6, 18).
CONNECT
button (19) on the Trans-
mitter Unit.
button (5) and the R but-
ton (7) on the Receiver Unit.
2017-06-13 16:42:18