Using The Receiver Unit; Switching On The Receiver Unit; Selecting The Sound Volume - Bellman & Symfon AUDIO DOMINO CLASSIC BETXAUD2 Manual De Instrucciones

Using the Receiver Unit

Connect BE9122 Bellman Stereo Headphones, BE9159 Bellman Neck Loop,
BE9125 Bellman Stetoclip, BE9124 Bellman In-ear Phones or another listening
product recommended by Bellman & Symfon to the headphone output (13) on
the right-hand side as illustrated in the fold-out section of the manual.
62
BE2250_001MAN005_book.indb 62

Switching on the Receiver Unit

Press the On/Off button i (6). The Battery Status LED
(3) starts to shine with a green light to indicate that the
unit is on.

Selecting the sound volume

Use the volume control's + button (9) to increase and
the - button (10) to decrease the sound level. The
Volume and Tone LED Indicator (8) shows the sound
level. The more LEDs that are lit the higher the volume.
The LED indicator goes out 10 seconds after the sound
volume has been set.
2017-06-13 16:42:04