Switching Off; External Sound Source - Bellman & Symfon AUDIO DOMINO CLASSIC BETXAUD2 Manual De Instrucciones

1 s
OFF

External sound source

If the audio cable (which has a small 2.5 mm jack plug on one end), or if the Ex-
ternal Microphone is connected to the Transmitter Unit's external sound source
input (20), the Transmitter Unit's internal microphone will be disconnected and
the external sound source will be automatically selected. The Battery Status
LED blinks orange several times to confirm that an external sound source has
been connected. The External Sound LED (4) will light up green and orange
at the same time to indicate that the sound is coming from an external sound
source.
If the audio cable is disconnected, the sound will be reconnected to the Trans-
mitter Unit's microphone again.
With the audio cable connected between a Transmitter Unit and a TV, hi-fi
equipment, MP3 player or similar sound source you can listen to absolutely first
class stereo sound without being limited by cables.
The input sensitivity is automatically adjusted to suit different sound sources.
BE2250_001MAN005_book.indb 65
1 s
OFF

Switching off

When you have finished, you
can switch off the Transmitter
and Receiver Units by press-
ing the On/Off buttons i (6,
18) and holding them down
until the Battery Status LEDs
(3, 17) go out.
2017-06-13 16:42:04
DE
DK
EN
ES
FI
FR
IT
JP
NL
PL
SE
SI-CN
TR-CN
APP
65