Hold-Down Brackets (Optional); Operation Operating The Shade - Levolor Fabric Instalación

INSTALLATION–ADDITIONAL COMPONENTS

HOLD-DOWN BRACKETS (optional)

•
Ideal for doors, hold-down brackets prevent shade from swaying. Assemble as
shown to each side of bottom rail.
•
Position hold-down brackets against
wall/frame, mark screw hole locations.
•
Screw into marked hole locations.
OPERATION
CONTINUOUS CORD LOOP
•
Pull the rear cord of the cord loop to lower the shade to the desired height.
•
Pull the front cord of the cord loop to raise the shade to the desired height.
WARNING: If the tension device moves up the cord, you have not
secured the tension device to the wall or window frame. You must
!
do so for the shade to operate properly and to help protect young
children from accidental strangulation.
12 12
Continuous Cord Loop Lift Control–Standard Valance