Removing The Shade - Levolor Fabric Instalación

REMOVING THE SHADE

•
Fully raise the shade.
•
Locate clear, plastic locking ring on spring-loaded end plug.
— Note–This is the side without the cord loop chain.
1–Rotate ring until to unlock.
2–Press shade toward the mounting bracket.
3–Carefully lower shade from mounting brackets.
•
Uninstall remaining brackets if necessary.
! CAUTION: Hold shade firmly when removing. Failure to do so may
result in the shade falling and possible injury.
2
Continuous Cord Loop Lift Control–Standard Valance
UNINSTALL
1
13