Auriol AFT 77 B2 Manual De Instrucciones página 13

If the outdoor temperature is not displayed within approx. 3 minutes,
the temperature station will stop searching for reception.
The reception icon
temperature panel r. The system likely cannot detect a signal due
to structural conditions or because the sensor is too far away.
If the device is unable to automatically connect to the outdoor sensor,
you can establish a connection manually:
♦ Press and hold the
on the outdoor temperature panel r.
Press the TX button d to manually start the wireless signal for the
♦
outdoor sensor.
The temperature station automatically starts to receive the WWVB signal
after 3 minutes, regardless of whether the outdoor sensor reception
search was successful or not.
The reception icon
icon is not flashing completely ( ) on the display 4, it means that
the reception of the WWVB signal is too weak and the time cannot be
synchronized. Try to find a set-up location where the reception icon ( )
flashes completely on the display 4. If the WWVB signal is being
received correctly, the current Coordinated Universal Time (UTC) is dis-
played on the time panel 6 and the date and weekday are displayed
on the date panel 8. In addition, the reception symbol
ly displayed on the time panel 6.
AFT 77 B2
IB_345564_AFT77B2_Funk-Temperaturstation_LB9.indb 13 _345564_AFT77B2_Funk-Temperaturstation_LB9.indb 13
turns off and is displayed on the outdoor
button 0 until the reception icon
flashes on the time panel 6. If the reception
flashes
is permanent-
│
US - EN 13 ■
10.09.20 15:3 10.09.20 15:34