Backlight Button - HUBITOOLS HU31010 Manual Del Usuario

MAX/MIN
1. Press the MAX/MIN key to activate the MAX/MIN recording mode. The display icon "MAX or MIN"
will appear. The meter will go to manual ranging & display and hold the maximum or minimum
reading and will update only when a new "max or min" occurs.
2. Press the MAX/MIN key and a blinking "MAX MIN" will appear. The meter will display the present
reading, but will continue to update and store the max and min readings.
To exit MAX/MIN mode press and hold the MAX/MIN key for 2 seconds.

Backlight Button

1. Press the BACKLIGHT button to turn the backlighting ON.
2. Press the BACKLIGHT button again to turn the backlighting OFF.
Ω
Meter Functions - Voltage (V)
Volts " V"
Select the
The meter will automatically select he best voltage (V) range.
Select DCV or ACV with the MODE button.
Insert:
 Black lead in COM terminal.
 Red lead in V-Ω -RPM terminal
Touch the Black probe to ground or to the negative (-) circuit
Touch the Red probe to the circuit coming from the power source
IMPORTANT: Voltage must be measuring in parallel (Red probe
measuring circuit from power source).
Ω
range with the rotary switch.
WARNING
When measuring voltage,
be sure the Red test lead is
in the terminal marked "V".
If the test lead is in an Amp
(A) or Milliampere (mA)
terminal, you may
injured or the
damaged.
Ω
Ω
be
meter