Publicidad
Idiomas disponibles
Idiomas disponibles
Grill Head to Cart
_This step requires two people to lift and position grill head onto cart.
_lf not already done, remove the tie wraps and packing material from regulator hose, side burner
valve and igniter wire. Pull hose and igniter wire out to side of grill head.
_Carefully
lower the grill head onto the cart. Make sure the regulator hose and igniter wire are
hanging outside the cart. Open lid and attach head to cart with (4} M6x13 screws and
M6 compression washers.
[] Do not tighten
these screws
until the back rail is attached
to cart in Step 11 (D}.
M6X13 screws Qty: 4 pcs
M6 compression washer
Qty: 4 pcs
@@@@
L
34461-41600070
° 23
Publicidad
