Canon imageCLASS Serie Manual Del Usuario página 4

adequate prior notice to the user.
However, if advance notice is not possible, the telephone
company will notify the customer as soon as possible.
Also, the customer will be advised of his/her right to file
a complaint with the FCC if he/she believes it is
necessary.
WARNING
En
The Telephone Consumer Protection Act of 1991 makes
it unlawful for any person to use a computer or other
electronic device, including FAX machines, to send any
message unless such message clearly contains in a
margin at the top or bottom of each transmitted page
Fr
or on the first page of the transmission, the date and
time it is sent and an identification of the business or
other entity, or other individual sending the message
and the telephone number of the sending machine or
Es
such business, other entity, or individual. (The telephone
number provided may not be a 900 number or any
other number for which charges exceed local or long
distance transmission charges.)
Pt
[NOTE]
In order to program this information into your machine,
you should complete the procedure for registering your
name, unit's telephone number, time, and date in the
User's Guide.
Users in Canada
Pre-Installation Requirements for Canon Facsimile
Equipment
A. Location
Supply a suitable table, cabinet, or desk for the machine.
See the User's Guide for specific dimensions and weight.
B. Order Information
1. A single telephone line (touch-tone or rotary) should
be used.
2. Order a CA11A modular jack, which should be
installed by the telephone company. If the CA11A
jack is not present, installation cannot occur.
3. Order a normal business line from your telephone
company's business representative. The line should
be a regular voice grade line or an equivalent one.
Use one line per unit.
DDD (Direct Distance Dial) line
-or-
IDDD (International Direct Distance Dial) line if you
communicate overseas
[NOTE]
Canon recommends an individual line following industry
standards, i.e., 2,500 (touch-tone) or 500 (rotary/pulse
dial) telephones. A dedicated extension off a PBX (Private
Branch eXchange) unit without "Call Waiting" can be
used with your facsimile unit. Key telephone systems are
not recommended because they send nonstandard
signals to individual telephones for ringing and special
codes, which may cause a facsimile error.
C. Power Requirements
The power outlet should be a three-prong grounded
receptacle (Single or Duplex). It should be independent
from copiers, heaters, air conditioners, or any electric
equipment that is thermostatically controlled. The rated
value is 115 volts and 15 amperes. The CA11A modular
jack should be relatively close to the power outlet to
facilitate installation.
[Remarques]
• Le présent produit est conforme aux spécifications
techniques applicables d'Innovation, Sciences et
Développement économique Canada.
• L'indice d'équivalence de la sonnerie (IES) sert à
indiquer le nombre maximal de dispositifs qui
peuvent être raccordés à une interface téléphonique.
La terminaison d'une interface peut consister en une
combinaison quelconque de dispositifs, à la seule
condition que la somme des IES de tous les
dispositifs n'excède pas cinq.
[Notice]
• This product meets the applicable Innovation,
Science and Economic Development Canada
technical specifications.
• The Ringer Equivalence Number (REN) indicates the
maximum number of devices allowed to be
connected to a telephone interface. The termination
of an interface may consist of any combination of
devices subject only to the requirement that the sum
of the RENs of all the devices not exceed five.
• Before installing this equipment, users should ensure
that it is permissible to be connected to the facilities
of the local telecommunications company. The
equipment must also be installed using an
acceptable method of connection. In some cases,
the company's inside wiring associated with a single
line individual service may be extended by means of
a certifi ed connector assembly (telephone extension
cord). The customer should be aware that
compliance with the above conditions may not
prevent deterioration of service in some situations.
• The REN of this product is 1.0.
• Repairs to certifi ed equipment should be made by
an authorized Canadian maintenance facility
designated by the supplier. Any repairs or alterations
made by the user to this equipment, or equipment
malfunctions, may give the telecommunications
company cause to request the user to disconnect
the equipment.
• Users should ensure for their own protection that the
electrical ground connections of the power utility,
telephone lines, and internal metallic water pipe
system, if present, are connected together. This
precaution may be particularly important in rural
areas.
CAUTION
Users should not attempt to make such connections
themselves, but should contact the appropriate electric
inspection authority, or electrician, as appropriate.
[NOTE]
This equipment complies with the Canadian ICES-003
Class B limits.
EMC requirements of EC Directives (for
Oceania only)
This equipment conforms with the essential EMC
requirements of the relevant EC Directives. We hereby
declare that this product conforms with the EMC
requirements of the EC Directives at a nominal mains
input 230 V at 50 Hz, although the rated input of the
product is 220 to 240 V at 50/60 Hz. Shielded cables
must be used to comply with the technical EMC
requirements of the EC Directives.
E-Waste Rules
-India only-
This product is not to be disposed of with your
household waste, according to the E-Waste
(Management) Rules, 2016. This product should be
handed over to a designated collection point, e.g., to an
4
authorized collection site for recycling waste electrical
and electronic equipment (EEE). Improper handling of
this type of waste could have a possible negative impact
on the environment and human health due to
potentially hazardous substances that are generally
associated with EEE. At the same time, your cooperation
in the correct disposal of this product will contribute to
the effective usage of natural resources. For more
information regarding return and recycling of WEEE
products, please visit
http://www.canon.co.in/environment or write to us at
customer.delight@canon.co.in.
Also, this product complies with the "E-Waste
(Management) Rules, 2016" and prohibits use of lead,
mercury, hexavalent chromium, polybrominated
biphenyls or polybrominated diphenyl ethers in
concentrations exceeding 0.1 % by weight and 0.01 %
by weight for Cadmium, except for the exemptions set
in Schedule II of the Rule.
WARNING
Observe the following laser-related precautions
Any direct eye exposure to stray laser beams escaping
the machine may be harmful to the eyes.
• Never open covers other than those indicated in the
instructions in the manual for this machine.
• Never use controls, adjustments or operation
procedures other than those stipulated in the manual
as doing so could result in exposure to hazardous
radiation.
IMPORTANT
• This product is confirmed as a Class 1 laser product
as defined in IEC60825-1:2014 and EN60825-1:2014.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL À LASER DE CLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LÁSER DE CLASE 1
APARELHO A LASER DE CLASSE 1
LUOKAN 1 LASER-TUOTE
LASERPRODUKT KLASS 1
Laser beams can be harmful to humans. This machine is
fitted with covers and an outer casing that blocks laser
beams, so there is no risk of laser beams escaping the
machine during normal use.
Laser Safety Caution