Installation Of Wheels And Leveling Feet (Shown For 16U Frame) - Eaton Pulsar Serie Manual De Instalación Y De Usuario

2.3

Installation of Wheels and Leveling Feet (Shown for 16U Frame)

The battery sub-modules and power sub-modules must not be mounted yet.
Do not install the UPS or battery module in a closed environment without air circulation.
Follow steps 1 thru 6 for installation of wheels.
1. Place MX Frame on its side.
2. Install the two fixed-wheels on the back bottom of the unit with the screws provided.
3. Install the two swivel-wheels on the front bottom of the unit with the screws provided.
4. Install the four leveling feet.
5. Return MX Frame to upright position.
6. Attach the two seismic plates.
fixed wheels
leveling feet
4
56
57
55
1
2
optional
(87410)
63
3
swivel
wheels
6
16U Frame shown
5
86-87021-00 A01 - Page 15