Horizon Global 76525 Instrucciones De Instalación página 5

3. Remove fascia – Using a T15 torxbit remove (1) screw near bottom tail gate per side. Using a flat head screwdriver and a T15 torxbit remove (2) rivets and (2) screws
respectively at the bottom of fascia. Use plastic trim tools to remove the fascia starting at the outer edges near the wheel wells and gently pull the fascia. Disconnect
wiring harness male part on driver side if present.
4. Remove bumper beam – Remove the electric wiring harness female part on the bumper beam by gently sliding it. Using a 15 mm socket remove (2) nuts from the
metal bracket on the left-hand side of the bumper beam and remove metal bracket holding the wiring harness. Secure the wiring harness with a tape on the body of the
vehicle. Using a 15 mm socket remove the rest of (4) nuts from the bumper beam. Remove bumper beam.
©2021 Horizon Global™ Corp - Printed in Mexico Sheet 5 of 21 76525NP 06-25-21 Rev. A