Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Website:
www.horizonglobal.com
Technical Assistance: 800-632-3290
TechnicalSupport@horizonglobal.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
3500 lb. (1587 kg)
Weight Distributing
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2022 Horizon Global™ Corp - Printed in Mexico
Installation Instructions
PART NUMBERS: 76597, 84597, CQT76597
Max Tongue
Weight
Weight
525 lb. (238 kg)
N/A
N/A
LIMITED LIFETIME WARRANTY
Limited Lifetime Warranty ("Warranty"). Horizon Global ("We", "Us" or "Our")
1.
warrants to the original consumer purchaser only ("You" or "Your") that the product will be
free from material defects in both material and workmanship, ordinary wear and tear
excepted. The Warranty is valid only if (a) the products are returned to Us for inspection and
testing; (b) Our inspection discloses to Our satisfaction that any alleged nonconformance are
material and have not been caused by misuse, neglect, wear and tear, improper installation,
unsuitable storage, improper repair, alteration, or accident; and (c) the products were
installed, maintained and used in accordance with Our instructions. THE WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (OTHER
THAN THE WARRANTY OF TITLE AS PROVIDED BY THE UNIFORM
COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 8/2015
Sheet 1 of 27
Scan for safe towing
tip, or visit
http://qr.towingpro
ducts.net/qrproduct
s/qr-product
76597NP
6/15/22
Rev. A

Publicidad

loading

Resumen de contenidos para Horizon Global 76597

  • Página 1 TechnicalSupport@horizonglobal.com LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Horizon Global ("We", “Us” or “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the product will be To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: free from material defects in both material and workmanship, ordinary wear and tear •...
  • Página 2 MANUFACTURER’S RATING OR: Hitch Type Max Gross Trailer Weight Max Tongue Weight 3500 lb. (1587 kg) 525 lb. (238 kg) Weight Carrying Weight Distributing Hitch Illustration ©2022 Horizon Global™ Corp - Printed in Mexico Sheet 2 of 27 76597NP 6/15/22 Rev. A...
  • Página 3 Reinstall fascia – Reconnect all wiring first. Then reinstall the fascia using the plastic fasteners removed in step 2. Next, using a plastic rivet gun, install (1) rivet to hold fascia at the rear wheel well location removed in step 2. Reinstall taillights – reinstall taillights and taillight covers using original fasteners and reconnect all wiring removed in step 2. ©2022 Horizon Global™ Corp - Printed in Mexico Sheet 3 of 27 76597NP 6/15/22 Rev.
  • Página 4 Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. ©2022 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 27...
  • Página 5 2a. Remove fascia - Note: If the vehicle has mud flaps, remove them first by using an 8mm socket to remove the two bolts and a flathead screwdriver to remove the two push fasteners. Set aside for reinstallation. a.) Using a flat head screw driver, remove (7) plastic fasteners from the bottom of the fascia. ©2022 Horizon Global™ Corp - Printed in Mexico Sheet 5 of 27...
  • Página 6 3. Remove bumper beam – using a 14mm socket with extension, remove (2) fascia aside. M10 flange hex nuts and (4) M10 hex bolts from bumper beam. ©2022 Horizon Global™ Corp - Printed in Mexico Sheet 6 of 27 76597NP 6/15/22 Rev.
  • Página 7 1. Install the bumper over the hitch, loosely install (2) M10 nuts ⑨ and 3/8” conical washers (teeth side toward hitch) ⑧ onto the studs, and (4) M10 hex bolts ⑦ and 3/8”conical washers ⑧ into weldnuts in end panel. If equipped, reconnect blind spot monitor wire to top of bumper. ©2022 Horizon Global™ Corp - Printed in Mexico Sheet 7 of 27...
  • Página 8 See Figure 3. Note: Be sure area is clear of all electrical wiring before trimming. 3-5/8” Area to trim 4” Figure 3 Bottom View Fascia ©2022 Horizon Global™ Corp - Printed in Mexico Sheet 8 of 27 76597NP 6/15/22 Rev. A...
  • Página 9 2. 9. Reinstall taillights – reinstall the taillights and taillight covers using the original fasteners and reconnect all wiring removed in step 2. ©2022 Horizon Global™ Corp - Printed in Mexico Sheet 9 of 27...
  • Página 10 TechnicalSupport@horizonglobal.com GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Horizon Global (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera exempt de vices de Pour prévenir les blessures SÉVÈRES, FATALES ou les DOMMAGES matières et de fabrication, exception faite de l’usure normale.
  • Página 11 Instructions d’installation Numériser pour des instructions avec NUMÉROS DE PIÈCES : 76597, 84597, CQT76597 PHOTOS ou visiter Site Internet: www.horizonglobal.com http://qr.towingprod ucts.net/qrproducts/q Assistance technique: 800-632-3290 r-product TechnicalSupport@horizonglobal.com Applications : Durée de l'installation : 60 min Années Marque Modèles La valeur indiquée ci-dessus est la durée...
  • Página 12 Kit de fixation : 76597F NUMÉROS DE PIÈCE : 76597, 84597, CQT76597 ① Qté. (2) Ecrou du chariot 7/16-14 x 1,50" Gr5 Goujon M10-1.25 existant ② Qté. (2) Entretoise (2) Lieux .106 ”x.88”x 2” ③ Qté. (2) Rondelle plate 7/16"...
  • Página 13 Instructions d’installation NUMÉROS DE PIÈCES : 76597, 84597, CQT76597 Non inclus Figure 2 Zone à 3 5/8 po découper 4 po Vue de dessous du carénage Figure 3 Nota : Vérifier l’attelage fréquemment, en s’assurant que toutes les fixations et la boule sont serrées adéquatement. Si l’attelage est enlevé, boucher tous les trous percés dans le coffre ou la carrosserie afin de prévenir l’infiltration d’eau ou de gaz d’échappement.
  • Página 14 Débrancher le câblage et mettre le feu arrière de côté, des deux côtés. 2a. Retirer le carénage - À l’aide d’un tournevis à lame plate, retirer trois (3) rivets poussoirs en plastique le long du bord central inférieur du carénage. ©2022 Horizon Global™ Corp. - Imprimé au Mexique Feuille 14 de 27...
  • Página 15 (2) écrous hexagonaux à bride M10 et (4) boulons hexagonaux M10 de la poutre de pare-chocs. ©2022 Horizon Global™ Corp. - Imprimé au Mexique Feuille 15 de 27 76597NP 6/15/22...
  • Página 16 ⑧ sur les goujons, et (4) boulons hexagonaux M10 ⑦ et rondelles coniques 3/8" ⑧ dans écrous à souder dans le panneau d'extrémité. Selon l'équipement, rebranchez le fil du moniteur d'angle mort sur le dessus du pare-chocs. ©2022 Horizon Global™ Corp. - Imprimé au Mexique Feuille 16 de 27...
  • Página 17 3 5/8 po (larg. x haut.) dans le bas du carénage. Zone à 3-5/8 po découper 4 po Figure 3 Vue de dessous du carénage ©2022 Horizon Global™ Corp. - Imprimé au Mexique Feuille 17 de 27 76597NP 6/15/22 Rev. A...
  • Página 18 9. Réinstaller les feux arrière – Réinstaller les feux arrière et leur couvercle à l’aide de la visserie d’origine et reconnecter tout le câblage retiré à l’étape 2. ©2022 Horizon Global™ Corp. - Imprimé au Mexique Feuille 18 de 27...
  • Página 19 TechnicalSupport@horizonglobal.com GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Horizon Global ("nosotros", "nos" o "nuestro/a/s") Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: garantiza al comprador original únicamente ("usted" o "su/s") que el producto estará libre de defectos significativos tanto en materiales como en mano de obra, con la excepción del desgaste...
  • Página 20 Instrucciones de instalación Escanear para instrucciones de la instalación paso por NÚMEROS DE PARTES: 76597, 84597, CQT76597 paso con FOTO, o visitar Sitio web: www.horizonglobal.com http://qr.towingproducts. net/qrproducts/qr- Assistance técnica: 800-632-3290 product TechnicalSupport@horizonglobal.com Aplicaciones: Tiempo de instalación: 60 min. Años Marca...
  • Página 21 Vuelva a instalar las luces traseras: vuelva a instalar las luces traseras y las cubiertas de las luces traseras con los sujetadores originales y vuelva a conectar todo el cableado que retiró en el paso 2. ©2022 Horizon Global™ Corp - Impreso en México...
  • Página 22 Este producto cumple con las especificaciones y requisitos de seguridad para conectar dispositivos y sistemas de remolque del estado de Nueva York, V.E.S.C. Regulación V-5 y SAE J684. ©2022 Horizon Global™ Corp - Impreso en México Hoja 22 de 27...
  • Página 23 Reserve para la reinstalación. a.) Con un destornillador de cabeza plana, quite los (7) sujetadores de plástico de la parte inferior de la fascia. ©2022 Horizon Global™ Corp. - Impreso en México Hoja 23 de 27...
  • Página 24 Deje la viga del parachoques a un lado. Guarde las tuercas hexagonales con reborde para la instalación del enganche. ©2022 Horizon Global™ Corp. - Impreso en México Hoja 24 de 27 76597NP 6/15/22 Rev.
  • Página 25 3/8” (lado de los dientes hacia el enganche) ⑧ en los pernos, y (4) pernos hexagonales M10 ⑦ y arandelas cónicas de 3/8” ⑧ en tuercas para soldar en el panel final. Si está equipado, vuelva a conectar el cable del monitor de punto ciego a la parte superior del parachoques. ©2022 Horizon Global™ Corp. - Impreso en México Hoja 25 de 27...
  • Página 26 4" de ancho x 3-5/8" de alto. Ver la Figura 3. Nota: Verificar que el área esté libre de todo el cableado eléctrico antes de recortar. 3-5/8” Área a recortar 4” Figura 3 Vista inferior de la fascia ©2022 Horizon Global™ Corp. - Impreso en México Hoja 26 de 27 76597NP 6/15/22 Rev. A...
  • Página 27 9. Volver a instalar las luces traseras: volver a instalar las luces traseras y las cubiertas de las luces traseras con los fijadores originales y volver a conectar todo el cableado que se quitó en el paso 2. ©2022 Horizon Global™ Corp. - Impreso en México Hoja 27 de 27...

Este manual también es adecuado para:

84597Cqt76597