Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Website:
www.horizonglobal.com
Technical Assistance: 800-632-3290
TechnicalSupport@horizonglobal.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
3500 lb. (1587 kg)
Weight Distributing
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2020 Horizon Global™ Corp - Printed in Mexico
Installation Instructions
PART NUMBERS: 76333, 84333, CQT76333
Max Tongue
Weight
Weight
525 lb. (238 kg)
N/A
N/A
LIMITED LIFETIME WARRANTY
1.
Limited Lifetime Warranty ("Warranty"). Horizon Global ("We", "Us" or "Our")
warrants to the original consumer purchaser only ("You" or "Your") that the product will be
free from material defects in both material and workmanship, ordinary wear and tear
excepted. The Warranty is valid only if (a) the products are returned to Us for inspection and
testing; (b) Our inspection discloses to Our satisfaction that any alleged nonconformance are
material and have not been caused by misuse, neglect, wear and tear, improper installation,
unsuitable storage, improper repair, alteration, or accident; and (c) the products were
installed, maintained and used in accordance with Our instructions. THE WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (OTHER
THAN THE WARRANTY OF TITLE AS PROVIDED BY THE UNIFORM
COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 8/2015
Sheet 1 of 24
Scan for safe towing
tip, or visit
http://qr.towingpro
ducts.net/qrproduct
s/qr-product
76333NP
03-02-20
Rev. A

Publicidad

loading

Resumen de contenidos para Horizon Global 76333

  • Página 1 TechnicalSupport@horizonglobal.com LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Horizon Global ("We", “Us” or “Our”) To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: warrants to the original consumer purchaser only ("You" or “Your”) that the product will be free from material defects in both material and workmanship, ordinary wear and tear •...
  • Página 2: Installation Instructions

    MANUFACTURER’S RATING OR: Hitch Type Max Gross Trailer Weight Max Tongue Weight 3500 lb. (1587 kg) 525 lb. (238 kg) Weight Carrying Weight Distributing Hitch Illustration ©2020 Horizon Global™ Corp - Printed in Mexico Sheet 2 of 24 76333NP 03-02-20 Rev. A...
  • Página 3 Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. ©2020 Horizon Global™ Corp - Printed in Mexico Sheet 3 of 24...
  • Página 4 Using a 10mm socket, remove (2) screws from taillight and remove taillight by gently pulling rearward. Disconnect the wiring and set taillight aside, both sides. 2a. Remove fascia - Using a flat head screw driver, remove (3) plastic push-pin rivets from along bottom center edge of fascia. ©2020 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 24 76333NP 03-02-20 Rev.
  • Página 5 M10 flange hex nuts and (4) M10 hex bolts from bumper beam. releasing the clips holding the fascia. 2e, If equipped, disconnect all wiring harnesses from fascia and carefully set fascia aside. ©2020 Horizon Global™ Corp - Printed in Mexico Sheet 5 of 24 76333NP 03-02-20 Rev.
  • Página 6 (2) existing M10 flange nuts onto the studs, and (4) M10 hex bolts (item 1) provided with hitch into weldnuts in end panel. If equipped, reconnect blind spot monitor wire to top of bumper beam. ©2020 Horizon Global™ Corp - Printed in Mexico Sheet 6 of 24...
  • Página 7 See Figure 3. Note: Be sure area is clear of all electrical wiring before trimming. 3-5/8” Area to trim 4” Figure 3 Bottom View Fascia ©2020 Horizon Global™ Corp - Printed in Mexico Sheet 7 of 24 76333NP 03-02-20 Rev. A...
  • Página 8 2. 9. Reinstall taillights – reinstall the taillights and taillight covers using the original fasteners and reconnect all wiring removed in step 2. ©2020 Horizon Global™ Corp - Printed in Mexico Sheet 8 of 24...
  • Página 9: Garantie À Vie Limitée

    TechnicalSupport@horizonglobal.com GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Horizon Global (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera exempt de vices de Pour prévenir les blessures SÉVÈRES, FATALES ou les DOMMAGES matières et de fabrication, exception faite de l’usure normale.
  • Página 10 Instructions d’installation Numériser pour des instructions avec NUMÉROS DE PIÈCES : 76333, 84333, CQT76333 PHOTOS ou visiter Site Internet: www.horizonglobal.com http://qr.towingprod ucts.net/qrproducts/q Assistance technique: 800-632-3290 r-product TechnicalSupport@horizonglobal.com Applications : Durée de l'installation : 60 min Années Marque Modèles La valeur indiquée ci-dessus est la durée...
  • Página 11 Instructions d’installation Visserie : 76333F Panneau d'extrémité NUMÉROS DE PIÈCE : 76333, 84333, CQT76333 Boulon hexagonal ① Qté (4) M10 X 1.25 X 35 CL8.8 Goujon M10-1.25 existant Rondelle conique 3/8 po Poutre de pare-chocs ② Qté (4) Deux (2) endroits pièce 01292006...
  • Página 12 Débrancher le câblage et mettre le feu arrière de côté, des deux côtés. 2a. Retirer le carénage - À l’aide d’un tournevis à lame plate, retirer trois (3) rivets poussoirs en plastique le long du bord central inférieur du carénage. ©2020 Horizon Global™ Corp. - Imprimé au Mexique Feuille 12 de 24...
  • Página 13 M10 de la poutre de pare-chocs. attaches qui fixent le carénage. e.) Si présents, débrancher tous les faisceaux de fils du carénage et mettre le carénage de côté avec soin. ©2020 Horizon Global™ Corp. - Imprimé au Mexique Feuille 13 de 24 76333NP 03-02-20...
  • Página 14 écrous soudés du panneau d'extrémité. Si présent, reconnecter le fil du système de surveillance des angles morts dans le haut de la poutre de pare-chocs. ©2020 Horizon Global™ Corp. - Imprimé au Mexique Feuille 14 de 24...
  • Página 15 3 5/8 po (larg. x haut.) dans le bas du carénage. Zone à 3-5/8 po découper 4 po Figure 3 Vue de dessous du carénage ©2020 Horizon Global™ Corp. - Imprimé au Mexique Feuille 15 de 24 76333NP 03-02-20 Rev. A...
  • Página 16 9. Réinstaller les feux arrière – Réinstaller les feux arrière et leur couvercle à l’aide de la visserie d’origine et reconnecter tout le câblage retiré à l’étape 2. ©2020 Horizon Global™ Corp. - Imprimé au Mexique Feuille 16 de 24...
  • Página 17: Garantía Limitada De Por Vida

    TechnicalSupport@horizonglobal.com GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Horizon Global ("nosotros", "nos" o "nuestro/a/s") Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: garantiza al comprador original únicamente ("usted" o "su/s") que el producto estará libre de defectos significativos tanto en materiales como en mano de obra, con la excepción del desgaste...
  • Página 18: Equipo Necesario

    Instrucciones de instalación Escanear para instrucciones de la instalación paso por NÚMEROS DE PARTES: 76333, 84333, CQT76333 paso con FOTO, o visitar Sitio web: www.horizonglobal.com http://qr.towingproducts. Assistance técnica: 800-632-3290 net/qrproducts/qr- product TechnicalSupport@horizonglobal.com Aplicaciones: Tiempo de instalación: 60 min. Años Marca...
  • Página 19 Este producto cumple con las especificaciones y requisitos de seguridad para conectar dispositivos y sistemas de remolque del estado de Nueva York, V.E.S.C. Regulación V-5 y SAE J684. 0©2020 Horizon Global™ Corp - Printed in Mexico Hoja 19 de 24...
  • Página 20 Desconectar el cableado y colocar la luz trasera a un lado. 2a. Quitar la fascia: Con un destornillador de cabeza plana, quitar (3) remaches de presión a lo largo del borde central inferior de la fascia. ©2020 Horizon Global™ Corp. - Impreso en México Hoja 20 de 24...
  • Página 21 Si viene equipado, desconectar el arnés del cableado de la fascia y travesaño del parachoques. colocar la fascia a un lado. ©2020 Horizon Global™ Corp. - Impreso en México Hoja 21 de 24 76333NP 03-02-20...
  • Página 22 Si está equipado, volver a conectar el cable del monitor del punto ciego a la parte superior del travesaño del parachoques. ©2020 Horizon Global™ Corp. - Impreso en México Hoja 22 de 24...
  • Página 23 4" de ancho x 3-5/8" de alto. Ver la Figura 3. Nota: Verificar que el área esté libre de todo el cableado eléctrico antes de recortar. 3-5/8” Área a recortar 4” Figura 3 Vista inferior de la fascia ©2020 Horizon Global™ Corp. - Impreso en México Hoja 23 de 24 76333NP 03-02-20 Rev. A...
  • Página 24 9. Volver a instalar las luces traseras: volver a instalar las luces traseras y las cubiertas de las luces traseras con los fijadores originales y volver a conectar todo el cableado que se quitó en el paso 2. ©2020 Horizon Global™ Corp. - Impreso en México Hoja 24 de 24...

Este manual también es adecuado para:

84333Cqt76333