UPPAbaby VISTA Manual Del Usuario página 3

Prior to fitting adapters to stroller frame, engage brake on stroller
Fitting Adapters to Stroller Frame
To Attach Adapters:
1 Unsnap basket from front of stroller frame.
2 Pull tab on clasp to unfasten and rotate attachment bracket.
3 Align notch on adapter to cross bar and slide onto frame.
4 Rotate attachment bracket over frame and secure clasp into place by pressing
down on tab. Re-snap basket to frame.
To Remove Adapters:
1 Unsnap basket from front of stroller frame.
2 Pull tab on clasp completely and rotate attachment bracket.
3 Pull adapter off of stroller frame.
FAILURE TO FOLLOW THESE WARNINGS AND
INSTRUCTIONS COULD RESULT IN SERIOUS INJURY
OR DEATH. READ ALL INSTRUCTIONS BEFORE USE:
• Before each use, inspect your adapter to make sure the clasp is fully secured onto
the frame of the stroller.
• Weight limitations: recommended only for children within the height and weight
limits of models specified in this manual.
• Intended for use with UPPAbaby VISTA 2015 stroller, bassinet, and MESA infant car seat.
ENGLISH
and remove seat from frame.
WARNING