Projector Name; Dns Configuration; Subnet Mask,Gateway - NEC LT260K Manual De Usuario

USING ON-SCREEN MENU
Automatic ........ Automatically assigns an IP address to the projector
Manual ............ Provides a space for you to register the IP address or
IP Address ...... Set your IP address. Press
Subnet Mask ... Set your subnet mask number. Press

Projector Name

........................ Specify a unique projector name. Press
Gateway .......... Set the default gateway of the network connected to

DNS Configuration

........................ Type in the IP address of DNS server on the network
Domain Name . Type in domain name of the network connected to the
All manuals and user guides at all-guides.com
Menu Descriptions & Functions
from a DHCP server.
subnet mask number obtained from your network ad-
ministrator.
keyboard and type in 12 numeric characters.
software keyboard and type in 12 numeric characters.
the software keyboard and type in. Up to 16 alphanu-
meric characters can be used.
the projector. Press
and type in 12 numeric characters.
Checking this box will make the set default route valid.
When data is sent from the LAN card, the transfer lo-
cation will be searched according to the previously set
routing information; however, when the transfer loca-
tion has not been found as a result of the search, the
data will be sent to the device that holds the IP ad-
dress set here. The IP address that is set here must be
one that can be identified by a search of the routing
information.
connected to the projector. 12 numeric characters are
used.
projector. Up to 60 alphanumeric characters can be
used.
E-103
to display the software
to display the
to display the software keyboard
to display