NEC LT260K Manual De Usuario página 98

USING ON-SCREEN MENU
[Page 3]
Selecting Signal Format [Signal Select]
RGB1/2:
Allows you to choose "RGB" for an RGB source such as a com-
puter, or "Component" for a component video source such as a DVD
player. Normally select "RGB/Component" and the projector auto-
matically detects an either incoming signal. However there may be
some component signals that the projector is unable to detect. If
this is the case, select "Component". Select "Scart" in RGB 1 for the
European Scart.
VIDEO and S-VIDEO:
This feature enables you to select composite video standards manu-
ally. Normally select "Auto". Select the video standard from the pull-
down menu. This must be done for Video and S-Video separately.
[Page 4]
Enabling Auto Adjust [Auto Adjust]:
When "Auto Adjust" is set to "On", the projector automatically deter-
mines the best resolution for the current RGB input signal to project
an image using NEC's Advanced AccuBlend Intelligent Pixel Blend-
ing Technology.
The image can be automatically adjusted for position and stability;
"Horizontal Position", "Vertical Position", "Clock", "Phase", and
"Resolution".
On .............. Automatically adjusts image "Horizontal Position", "Ver-
Off .............. User can adjust the image display functions ("Horizon-
All manuals and user guides at all-guides.com
Menu Descriptions & Functions
tical Position", "Clock", "Phase" and "Resolution".
tal Position", "Vertical Position", "Clock", "Phase" and
"Resolution") manually.
E-98