Dash Disassembly - Metra 99-5828CH Instrucciones De Instalación

IMPORTANT NOTE: The factory radio
must be powered off before starting
disassembly. Omitting this step will
disable the menu function.
1. Unclip and remove the (2) trim
panels from the left and right side
of the factory radio. (Figure A)
2. Remove (4) 9/32" screws securing
the radio/climate control panel to
the dash. (Figure B)
3. Unclip and remove the factory radio/
climate control panel. (Figure C)
(Figure A)
99-5828CH

Dash Disassembly

(Figure B)
(Figure C)
4. Remove (4) 9/32" screws securing
the radio chassis. (Figure D)
5. Remove (2) Torx screws from the
a/c vents then unclip and remove
the vents from the radio panel.
(Figure E)
6. Remove (4) 9/32" screws securing
the display in the sub-dash.
(Figure F)
7. Remove (4) 9/32" screws securing
the display to the display brackets
and keep display for kit assembly.
(Figure G)
Continue to kit assembly
(Figure D)
2
(Figure E)
(Figure F)
(Figure G)