BGS technic 8647 Manual De Instrucciones página 2

BGS BGS
8647 8648
M8x1 M9x1
USE
Threads with minor damages can be chased with a tap (1).
Please proceed as follows if the thread turns out to be severely
damaged and requires repair by introducing a tapped bush:
1. Use a reamer (2) for reaming out the damaged thread.
2. Now use a suitable tap (1) to cut a new thread to accommodate
the threaded bush (3).
(tap diameter identical to threaded bush diameter)
3. Slip the mounting sleeve (4) over the matching mounting pin (5)
and screw on the threaded bush (3) up to the required length.
4. Use the mounting pin (5) to insert the threaded bush into the
previously prepared thread and tighten it gently.
5. Remove mounting pin (5) and sleeve (4).
Note: We recommend to glue the threaded bush in the internal thread
with Screw Locking Fluid (BGS 80604 / 80605). This prevents an
unscrewing of the threaded sleeve, when loosening the screw later.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Thread Repair Set
BGS BGS
8649 8650
M10x1,25 M10x1
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS
8651
M12x1,25
8647 8648
BGS
8649 8650
8651 8653
BGS
8653
M8x1,0 - M9x1,0 - M10x1,0
M10x1,25 - M12x1,25
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed