Remove Packaging - Dacor DYF42SBI Serie Instrucciones De Instalación

Installation instructions

Remove packaging

CAUTION
Refrigerator is Top-Heavy – be careful when moving. When using an appliance trolley,
handle from Freezer side only.
NOTE
If corner posts are too long, cut the posts to a shorter length
• Lift the unit off the skid with the appliance trolley.
• Remove kickplate taped to the top of the unit.
• Set kickplate aside for final installation.
CAUTION
• Do not attempt to roll or drag until unit is off skid.
• Make sure the water line is clear of appliance trolley to avoid damage.
18 English
TBI_Dacor_Installation_DA68-03583A-03_EN.indd 18
• Carefully cut banding at the top and
bottom, remove outer carton.
• Slide out rear corner posts (2).
• Slide carton off top of cabinet.
NOTE
Do not lay cabinet down in order to
remove skid!
• The unit is secured to the skid with six
1/2" (11 mm) bolts.
• Remove all six 11 mm bolts that secure
metal brackets to the refrigerator.
• Tilt unit up on Freezer side toward
Fresh Food side.
• Push bolts down, remove metal bracket
from Freezer side.
• Slide the appliance trolley underneath
the Freezer side.
• Using corner posts (2 on front corners)
to prevent damage, secure unit to
appliance trolley.
2020-10-15 10:39:34