4
Installation
4.1 Choosing the right location
Your installation location should meet the following requirements:
- Make sure that you install your unit on an even surface to minimize noise and vibration.
- The unit must be installed near a grounded plug, and the collection tray drain (found on the back of
the unit) must be accessible.
- The unit should be located at least 30 cm (12") from the nearest wall to ensure proper air
conditioning.
- Do not cover the Intakes, outlets or remote signal receptor of the unit, as this could cause damage to
the unit.
4.2 Recommend installation
Local air conditioner / Instruction Manual
50 cm
19.7 inch
25 / 276 EN