Design And Compliance Notes - Beko BA309C Manual De Instrucciones

8

Design and compliance notes

Design notice
The design and specifications are subject to change without prior notice for product improvement.
Consult with the sales agency or manufacturer for details. Any updates to the manual will be uploaded
to the service website, please check for the latest version.
Energy rating information
The Energy Rating for this unit is based on an installation using an un-extended exhaust duct without
window slider adaptor or wall exhaust adaptor A (as shown in the Installation section of this manual).
Unit temperature range
Mode
Cool
Dry
Heat (pump heat mode)
Heat (electrical heat mode)
Note: To be in compliance EN 61000-3-11, the product BA312H shall be connected only
C
to a supply of the system impedance: I Zsys I = 0.348 ohms or less, the product BA312C
shall be connected only to a supply of the system impedance: I Zsys I = 0.362 ohms or
less. Before connect the product to public power network, please consult your local
power supply authority to ensure the power network meet above requirement.
42 / 276 EN
Temperature range
17-35°C
13-35°C
5-30°C
≤30°C
Local air conditioner / Instruction Manual