Memory Management - DPM Dew Point Meter Manual De Instrucciones

Emissivity
Sets the emissivity ratio for the PosiTector DPM IR infrared
temperature sensor.
Select from a User Entered Value or one of the following preset
options:
- Aluminum (rough) = 0.07
- Zinc (Galvanized) = 0.25
- Concrete = 0.54
- Paint = 0.96
The PosiTector DPM has internal memory storage for recording
measurement datasets. Stored datasets can be reviewed on-
screen or accessed via computers, tablets and smart phones.
Datasets are date and time-stamped. Datasets can be stored
manually (using the
mode.
The symbol appears when the Gage is set to store datasets.
Standard models store up to 2,500 datasets in one batch.
Advanced models store 250,000 datasets in up to 1,000 batches.
"New Batch" closes any open batch and creates a new batch name
using the lowest available number. New batch names are date
stamped when they are created.
Scroll through display
modes (Advanced only)
Delete last reading
Access the Menu
Screen Capture
Press both
the current display. The last 100 screen captures are stored in
memory and can be accessed when connected to a computer
(see PosiSoft USB Drive pg. 9).
(PosiTector DPM-IR Models Only)

Memory Management

Memory Management
button), or automatically using the Auto Log
and buttons simultaneously to save an image of
- Plastics = 0.94
- Steel (Oxidized) = 0.95
- Wood = 0.95
7
Store a dataset
into memory
Restore brightness
after dimming