Set The Setpoint Temperature For Refrigeration Operations; How To Start Only Refrigeration - Infrico DIXELL XH360L Empleo

c. Push again the CLOCK to confirm the time and pass to the setting of the sunning
phase: the "on" message is displayed,
d. Push again CLOCK to see your duration and using the keys UP and DOWN to set
point in valour "00:00",
e. Push again the CLOCK to confirm the time and pass to the setting of the stopping
phase: the "oFF" message is displayed,
f. Push again CLOCK to see your duration and using the keys UP and DOWN to set
point in valour "00:00",
g. Confirm the value by pushing again the CLOCK key and pass to the humidity display.

3.2. SET THE SETPOINT TEMPERATURE FOR REFRIGERATION OPERATIONS

a. Push the SET_T key, the display shows on the upper display the "StG" message,
while the "set" icon starts flashing,
b. Push again the SET_T and show the set point temperature in the dripping phase
(on).
c. Push again the SET_T to confirm the value and pass to the setting of the dripping
phase: the "St1" message is displayed,
d. Push the SET_T key to see its value and use the UP and DOWN keys to set 4ºC.

3.3. HOW TO START ONLY REFRIGERATION

Push and release START key to start in refrigeration operation: the led
led flashes during the proving phase. If this led is not turn-on in this mode, the
The
apparatus is not working, push START key.
To come back to program it to the drying phase just have to follow step 1 to the inverse and set the
time of dripping phase "dri" in 00:00, and the ON and OFF in the values that normally used for drying.
Page: 6 /6 Date: 06/04/16 Review: 01
will be turned ON.