Standard Extender/Splitter Installation
Notes:
1) Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid wire Cat5e/6
cable. Using stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher
than 24 AWG, will result in shorter extension distance. Higher gauge cabling, such
as 26 AWG, has a more limited transmission capability than lower gauge cabling. All
Tripp Lite N202-Series cables are made with 24 AWG solid wire cabling.
3) The B126-002 and B126-004 are set to transmit a stereo audio signal by default.
Press the Audio button on the B126-002 or B126-004 to switch to 7.1-channel
surround-sound audio.
4) The installation diagram shows the B126-004 local transmitter unit. The
B126-002 installation is the same except there are only two remote ports and no
local monitor port.
5) External power is not usually required for the B126-1P0-MINI, but it includes a
USB Micro-B port and cable to provide external power when needed. If you are
not getting an image on the monitor when using the B126-1P0-MINI, connect the
included USB cable between the USB Micro-B port and a power source (such as a
USB charger).
Up to 100 ft. at 1080i (60Hz)
Up to 50 ft. at 1080p (60Hz)
OPTIONAL LOCAL
MONITOR
17-07-081-933731.indb 13
Up to 200 ft. at 1080i (60Hz)
Up to 150 ft. at 1080p (60Hz)
B126-1A0-WP-1
B126-1A0
B126-004
BLU-RAY
13
B126-1P0-WP-1
B126-1P0
8/2/2017 8:57:24 AM