STARFRIT 024226 Instrucciones De Uso Y Mantenimiento página 6

Inserting dough hooks:
• Unplug the hand mixer and set the speed variable control to 0.
• Insert dough hook with collar on the right side which has the larger opening.
(See image above)
• Firmly push dough hooks in until they click into place. Insert the dough hook
without collar on the left side which has the smaller opening. Ensure that dough
hooks are fully inserted before using the mixer.
NOTE: Dough hooks must be inserted into the correct side and are not
interchangeable.
TO USE:
1. Ensure the speed variable control on the hand mixer is set to the 0 position.
2. Insert beaters or dough hooks according to section to assemble.
NOTE: Ensure the beaters or dough hooks are firmly positioned before operating.
3. Plug the appliance into a standard 120-volt AC electrical outlet.
4. Add the ingredients into a bowl, hold the mixer handle and position the beaters or
dough hooks in the center where the food will be mixed.
5. Set the speed variable control on the lowest speed to start mixing. Gradually
increase the speed variable control from lower to higher speed until desired
speed. The speed variable control includes speeds 1 through 5 with a Turbo
function. The mixer will run at the highest speed when pressing the Turbo button.
(See mixing guide and turbo function)
NOTE: Keep the beaters or dough hooks always immersed in the mixture to avoid
splashing the mixture from the spinning beaters or dough hooks.
6. Guide the beaters or dough hooks in constant motion circling around the
circumference of the bowl and through the center to incorporate all ingredients. If
necessary, to scrape the sides or bottom of the bowl using a utensil, ensure that the
speed variable control is at 0. The hand mixer can be placed vertically and stay still
because of its self-stand design.
6
Collar
Right side