Install The Handle - Kohler K-T9472 Guia De Instalacion

Round Handle
Control Knob
"Off" Indicator
Graphic
"High" Indicator
Graphic

2. Install the Handle

Press the control knob onto the valve stem so the "OFF" indicator
graphic (smallest line) is to the top (toward the top escutcheon
detent, as shown in the illustration).
Secure the control knob to the valve stem with the screw.
For Round Handle: Carefully install the thin O-ring into the first
groove in the control knob. Fit the grip ring into the second
groove in the control knob.
For Lever Handle: Install the O-ring into the groove in the
control knob.
For Both Handles: Press the cap into the control knob so the cap
detent is in line with the "HIGH" indicator graphic on the control
knob (as shown in the illustration). If needed, apply a small
amount of lubricant to the inside wall of the cap to aid in
assembly; a capsule of lubricant is included in the hardware kit.
1012608-2-B
Rotate counterclockwise.
Lever Handle Assembly
Screw
O-Ring
Screw
Cap
O-Ring
Grip Ring
Apply silicone
lubricant if needed.
4
Apply silicone
lubricant if
needed.
Detent
Kohler Co.